| PM060 Model Specifications & Options | PM060 |
| Net Liquid Oil Capacity (U.S. Gallons +5% Expansion) | 60 |
| Lockable Fill Opening Diameter (Oil Tank) | 10" |
| Net Liquid Flushing/Recovery Capacity (U.S. Gallons) | 7/7 |
| Oil Pumping Capacity (GPM) | 13 |
| Drive: V-belt with Heavy Duty Centrifugal Clutch | Standard |
| Hinged Hood Over Pump/Engine Assembly | Standard |
| 5 Ft. Light weight Spray Wand with End Shutoff Valve | Standard |
| 25 Ft. Spray Wand Hose | Standard |
| Spray Wand Recirculation | Standard |
| 5 Bhp Electric Start | Standard |
| U-1 Battery | Standard |
| Exhaust Heat Bonnet Over Bituminous Pump | Standard |
| 1½" L.P. Gas Burner | Standard |
| 3" Diameter Full Length U Shaped Retort Tube | Standard |
| 0-20 PSI Regulator & Gauge for LPG | Standard |
| LPG Safety Out Fire Protection Valve & Thermocouple | Standard |
| 12-volt DC Electric Spark Igniter | Standard |
| 32-250° F Thermometer | Standard |
| Fork Lift Pockets 4x8 inch Full Length | Standard |
| Full 12 Gauge Top | Standard |
| Asphalt Flush/Recovery Tanks Bolted to Skid Frame | Standard |
| D-rings to Secure Equipment | Standard |
| Black Enamel | Standard |
| Yellow (ZYEL) Orange (ZORG) Red (ZRED)White (ZWHT) | Option |
| Height | 36" |
| Width | 37" |
| Length | 72" |
| Net Weight Excluding Options | 785# |
| Approx. Loaded Weight 60 gal. emulsion, 7 gal. flush & 2 ea. 20# LPG bottles | 1,400# |
| Fifty (50) Foot Spray Wand Hose (Z50H) | Option |
| D.O.T. Combustible Placards & 20-BC Fire Ext. (ZDOT) | Option |
| 115-volt Out-of-Service Tank Heater w/Thermostat (ZETH) | Option |
| LPG Hand torch w/Regulator, 25 ft Hose &D-Wraps (ZPJT) | Option |
Diamond Steel Co., Inc.
